Microwave Not Heating Food but Still Runs? How to Fix It (2024)

Fixing your own microwave

Spending time fixing your own microwave saves you a significant amount of money and is often achievable with tools found in the garage. However, it is important to be careful when fixing your own microwave as they are powerful appliances that pose a shock risk. By unplugging your microwave and discharging the capacitor you can reduce the risk of any potential injuries.

Microwave models

This guide applies to most microwaves including those from:

Breville including model LMO525BSS2JAN1
Fisher & Paykel models OM60NDB1
LG models MS4296OMBS, MS2336DB
Panasonic models SD372SR, SN67KS, SN686SR
Samsung models ME9114GST1, MS20A3010AL, MG22M8074AT
Sharp models R60A0S, R395EBS, SM327FHW
Sheffield models PLA0925, PLA0920

Common problems and how to fix them

1. Magnetron

A broken magnetron is the most common reason that your microwave is running but not heating your food. The magnetron is an essential part of a microwave which is responsible for creating the microwaves needed to heat your food. The magnetron can become damaged if the appliance is run without any food in it, or due to broken magnets and loose connections.

Signs you have a broken magnetron

Your microwave runs but does not heat the food
Your microwave is making abnormal noises, including a loud humming or vibrating noise, or a clicking sound.
When inspecting the magnetron, one of the two magnets appears broken, or the metal cylinder that inserts into the microwave is discolored, i.e., is no longer silver

How to replace a broken magnetron

Unplug the microwave and unscrew the side of the microwave to expose the components, including the magnetron. The magnetron is a small, metallic, box-shaped component that is screwed into the microwave
Discharge the capacitor by touching the tip of a large screwdriver, or pliers with an insulated handle to the metal
Disconnect the wires attached to the magnetron, making sure the screws are kept safe
Fit the new magnetron into the space, hooking it in and securing it with the same screws. (The new magnetron will need to be from the same model)
Plug the new magnetron in with the original wiring and reattach the side of the microwave

Finding a replacement magnetron

Magnetrons come in a variety of shapes, sizes, and configurations depending on which microwave you own. Different models include LG, Panasonic, and Samsung, to name a few. Every magnetron will have a sticker with the brand name and a model number on it. A replacement magnetron should have the same model number to ensure it is compatible with your microwave.

2. Broken door switch

The microwave door switch usually stops microwaves from being generated when the microwave door is open. The door switch is located inside the door of the microwave and is normally about an inch long with metal prongs attached. If the switch is broken, the microwave may appear to be working but will not be generating any microwaves and will not heat the food. Replacing a door switch is usually quite inexpensive as they are commonly used in other appliances.Some microwaves though will not run at all if the door switch is broken.

Signs your door switch is faulty

When using your microwave, the turntable does not turn and the microwave does not heat up
The microwave light does not come on when the door is opened

How to replace a broken door switch

Unplug the microwave
Remove the control panel by unscrewing the face or rims of the microwave
Remove the wiring attached to the control panel, taking a reference photo to use when reconnecting the board
Unscrew the switch assembly located on the side, sliding it out of place as necessary
Remove the connectors attached to the switch assembly, again taking reference photos to use later
Test for the defective switch using an odometer, or isolate the broken switch by looking for any signs of erosion
Remove the faulty switch, either by unscrewing or unclipping the switch
Screw, or clip in a replacement switch
Reassemble the microwave, plugging in all the necessary wiring and screwing in the brackets and face that was removed

Finding a replacement door switch

It is important that the right door switch is used so that your microwave is able to operate. Parts will usually need to be bought from the same brand and have the right number of terminals – usually 2 or 3. The switches will also be ‘usually open’ or ‘usually closed,’ it is important to choose the right one.

3. High voltage diode `

A high voltage diode provides the power to the megatron that creates microwaves to heat your food. A defective high voltage diode will result in a microwave that runs but does not heat your food.

Signs your high voltage diode is broken

You notice an electrical burning smell
Your microwaves fails to heat food
You notice a sparkling, buzzing or humming sound

Replacing a high voltage diode

Unplug the microwave
Remove the control panel by unscrewing the face or rims of the microwave
Discharge the capacitor by touching the tip or a screwdriver, or pliers with an insulated handle to the metal
Unscrew the diode from the frame and capacitor to remove it
Install the new diode by using pliers to connect it to the terminal on the capacitor
Screw the other side of the diode to the support bracket
Reassemble the microwave by securing all loose screws and inserting the panel back into place

Finding a high voltage diode

High voltage diodes are not universal. It is important to buy the right diode by checking the model number of your microwave against the new diode.